| Connector | Cable | A | B | C | Crimp Tool |
| FCT 100 | CT 100 & RG 6 | 8 mm | 5 mm | 7 mm | FCT CCT |
| FCT 101 | CT 125 | 9 mm | 4 mm | 8 mm | FCT CCT |
| FCT 102 | CT 167 & RG 11 | 5 mm | 5 mm | 4 mm | FCT CCT |
| FCT 103 | RG 59 | 8 mm | 5 mm | 7 mm | FCT CCT |
Instructions for use
Strip and prepare the end of the cable as per the table and diagram above. Bend the screen back over the outer jacket and remove the inner foil (if the cable has one!) completely. Push the connector on so that the inner tube slides between the dielectric and the screen & foil (The dielectric should be flush with the face inside the threaded end). Crimp the outer sleeve with the crimp tool.
| © Bryant Broadcast 2008 E&OE |
|
70b Stafford Road, Croydon, Surrey, CR0 4NE. Tel: +44 (0)20 8404 4050 Fax: +44 (0)20 8404 4080 |
