Key Features |
 | Compact size - 96 jacks in 1U panel |
| On the fly normalling provides excellent flexibility |
| Short installation times with 40% frwer wires to solder |
| No normalling wires to prepare (all normalling done internally within the jack modules) |
| Ideal for fixed or mobile installations |
| Manufacturer's Lifetime Guarantee |
| | | | |
Specifications |
| Mechanical life: 30,000 cycles |
| Insertion / Withdrawal forces: 0.5 - 1.8 Kgs |
| Jack contact resistance: 30 milliohms maximum |
| Insulation resistance: 10k Megaohms |
| Dielectric withstand voltages: 500VAC (rms) |
| Insertion loss: better than -0.5dB up to 10Mhz |
| Contacts and switching spring material: Silver plated copper alloy |
| Welded switch contacts: Gold |
| Operating temperature; -40°C to +65°C |
| | | | |
Rear Connection options |
| EZ Norm can be provided with a wide range of rear termination options, including: |
| Solder Terminal | | 56 pin EDAC |
| Wire wrap terminal | | 90 pin EDAC |
| 3 pin EDAC | | Cannon DL |
| 38 pin EDAC | | PPT punch down |
The EZ Norm offers a simplified method for setting up and changing normals to a Bantam/TT patchbay. Simply remove the middle designation strip and rotate the center cam using a standard screwdriver. An audible "click" can be heard as you rotate from full normalled to no normalling to half normalled. An opaque marking strip is included to conceal the normal position, if needed.
